Angle Grinder Chop Saw

Description These instructions are a complete step by step guide that will show you how to build an angle grinder chop saw using a $15 Harbor Freight angle grinder (item #69645, to be specific). With the grinder included, it’ll probably cost you around $25 total! This project is designed to be an EASY build. You can probably get most of it done in a couple of sessions. The most time consuming part will be waiting for epoxy and polyurethane to dry! About the plans: Formatted for normal sized (8.5″ x 11″) printer paper, so you can print them at home. Includes Metric AND Imperial (U.S.) Version. They include: A complete shopping list for the materials you need. A complete list of parts you need to cut with all the dimensions necessary (with images). Step by step instructions that accompany and compliment the build video. About the Disc Sander: Dimensions: 11″ long x 10″ wide x 9″ tall. Uses a Drill Master angle grinder from Harbor Freight (not included). Tools required (or at least strongly suggested) to build this project: Table Saw Miter Saw (Recommended, but not necessary if you have a table saw sled or another way to make good cross cuts) 23 Gauge Pin Nailer (Recommended, but not strictly necessary) Drill Drill Press (Recommended, but you could get by with a regular drill) 5/64″ or 1/16″ (1.5-2.5mm) bit 7/8″ (22mm) Spade or Forstner Bit 1/8″ (3.2mm) 1/4″ (6-6.5mm) 5/8″ Bit (16mm) 5/16″ Bit (8mm) 5/16-18 (8mm x 1.25) Thread Tapping Bit Sander/Sandpaper Flat File   Because this is a digital product, no refunds are allowed.